• electrical equipment singapore
  • fluke distributor singapore
  • fluke distributor singapore
Fluke 772 Milliamp Clamp Meters

Milliamp process clamp meters can measure mA signals without breaking the loop.The Fluke 772 mA Clamp Meter expand upon the capabilities of the popular 771 mA Clamp Meter, adding loop power and mA sourcing to the troubleshooting and process calibration capabilities in all Fluke mA clamp meters.

Product Description

Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 772 Clamp Meters will help you:

Milliamp Clamp FeaturesApplicationHow it saves time and money
Measure mA signals for PLC and control system analog I/O without breaking the loopMeasures low level dc currentCorrelate process indication with real physical value
Measure output signals from transmitters without breaking the loopMaintain and troubleshoot process and automation equipment without breaking the loopNo disruption to the process
Detachable clamp with extension cableMeasurements in tight locationsEnables measurements in difficult situations
Measurement SpotlightIlluminates hard to see wires in dark enclosuresMeasurement process is easier and quicker
Measure up to 99.9 mA range non-contactWide range of measurementsMeasures 10 to 50 mA signals in older control systems
Automatic power offAfter 15 minutes and 2 minute automatic off for backlight and spotlightSaves battery life

F 771 19a s

The 772 mA Clamp Meter features:

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without ”breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20 mA output for remote testing

What’s the difference between the 77X models?

.

Fluke-771

Fluke-772

Fluke-773

.

Non-contact mA loop measurement

Integrated mA loop troubleshooting

Advanced process troubleshooting

mA measure, jaw
mA measure, in circuit.

Loop power.

mA source.

DCV measure..

DCV source..

mA scaled output..

mA in / out..