SKU: AT-6010
Amprobe AT-6010 Advanced Wire Tracer Kit
Traces wires in walls, ceilings, floors and corners Locates breakers and fuses Pinpoints shorts and opens High resolution 2.5″” TFT LCD black & white display Simple one button Transmitter operation Two Transmitter signal modes “High Signal” mode for normal circuits “Loop” mode for closed loop de-energized circuits Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits Comes with custom Amprobe soft carrying case, test leads and accessories Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline Compatible with optional Signal Clamp (CT-400) clamp-on attachment
Specifications
| Measurement Category (Receiver) | CAT III 600 V |
| Measurement Category (Transmitter) | CAT III 600 V |
| Measurement Category (CT-400 Signal Clamp) | CAT IV 600 V, CAT III 1000 V |
| Operating Voltage (Receiver) | 0 to 600 V AC/DC |
| Operating Voltage (Transmitter) | 0 to 600 V AC/DC |
| Operating Voltage (CT-400) | 0 to 1000 V AC |
| Operating Frequency (Receiver) | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Operating Frequency (Transmitter) | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Operating Frequency (CT-400) | Wire tracing: 32.768 kHz; AC current measurement: 45 Hz to 400 Hz |
| Hazardous Voltage Detection | > 30 V AC/DC (Transmitter) |
| Signal Indications (Receiver) | Numeric, bar graph display and audible beep |
| Signal Indications (Transmitter) | LEDs |
| Response Time (Receiver) | Tip Sensor (Energized/De-energized): 500 ms; Battery voltage monitoring: 5 sec |
| Response Time (Transmitter) | Line voltage monitoring: 1 sec; Battery voltage monitoring: 5 sec |
| Response Time (CT-400) | Instantaneous |
| Current Output of Signal. Energized Circuit HI Mode | 60 mA RMS |
| Current Output of Signal. De-energized Circuit HI Mode | 130 mA RMS |
| Current Output of Signal. Loop Mode | 160 mA RMS |
| Current Output of Signal (CT-400) | 1 mA/A for AC current measurement with multimeter |
| Signal Voltage Output. De-energized Circuit HIGH | 33V RMS, 140 Vp-p |
| Signal Voltage Output, with CT-400 Loop Mode | 31 V RMS, 120 Vp-p |
| Signal Voltage Output (CT-400 De-energized) | 2.4 V RMS, 24 Vp-p |
| Range Detection. Tip Sensor Energized Max Distance (Open Air) | Up to 20 ft (6.1 m) |
| Range Detection, tip Sensor Energized Pinpointing | Approx. 1.97 in (5 cm) |
| Range Detection. Tip Sensor De-energized Max Distance (Open Air) | Up to 14.7 ft (4.5 m) |
| Range Detection, tip Sensor De-energized Pinpointing | Approx. 1.97 in (5 cm) |
| Display Size (Receiver) | LCD 2.5 in (6.35 cm) |
| Display Dimensions (Receiver) | 1.45 x 1.93 in (36.72 x 48.96 mm) |
| Display Type (Receiver) | Segment LCD |
| Display Type (Transmitter) | LEDs |
| Display Color (Receiver) | Black and white |
| Display Color (Transmitter) | Operating mode LEDs: red; Battery status LEDs: red |
| Booting Time (Receiver) | < 3 sec |
| Booting Time (Transmitter) | < 2 sec |
| Backlight (Receiver) | Yes |
| Operating Temperature (Receiver & Transmitter) | -4 °F to 122 °F (-20 °C to 50 °C) |
| Operating Temperature (CT-400) | 32 °F to 122 °F (0 °C to 50 °C) |
| Operating Humidity (Receiver & Transmitter) | 45%: -4 °F to <50 °F (-20 °C to <10 °C); 95%: 50 °F to <86 °F (10 °C to <30 °C); 75%: 86 °F to <104 °F (30 °C to <40 °C); 45%: 104 °F to 122 °F (40 °C to 50 °C) |
| Operating Humidity (CT-400) | 95%: 50 °F to <86 °F (10 °C to <30 °C); 75%: 86 °F to <104 °F (30 °C to <40 °C); 45%: 104 °F to <122 °F (40 °C to <50 °C) |
| Storage Temperature and Humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH |
| Operating Altitude | 0 to 6561 ft (2000 m) |
| Transient Protection (Transmitter) | 6.00 kV (1.2/50μS surge) |
| Pollution Degree | 2 |
| IP Rating (Receiver) | IP 52 |
| IP Rating (Transmitter) | IP 40 |
| IP Rating (CT-400) | IP 40 |
| Drop Test | 3.28 ft (1 m) |
| Power Supply (Receiver) | 4 x AA (alkaline) |
| Power Supply (Transmitter) | 8 x AA (alkaline) |
| Power Consumption (Receiver) | 70 mA |
| Power Consumption (Transmitter). HI Mode | 70 mA |
| Power Consumption (Transmitter). Loop Mode with Clamp | 90 mA |
| Power Consumption (Transmitter). Without Signal Transmission | 10 mA |
| Battery Life (Receiver) | Approx. 25 h |
| Battery Life (Transmitter), hi Mode | Approx. 25 h |
| Battery Life (Transmitter), loop Mode | Approx. 18 h |
| Low Battery Indication | Yes (Receiver and Transmitter) |
| Fuse (Transmitter) | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
| Maximum Conductor Size (CT-400) | 1.26 in (32 mm) |
| Dimensions. Receiver (L x W x H) | Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm) |
| Dimensions. Transmitter (L x W x H) | Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm) |
| Dimensions. CT-400 Signal Clamp (L x W x H) | Approx. 5.9 x 2.75 x 1.18 in (150 x 70 x 30 mm) |
| Weight (Receiver) | Approx. 0.6 lb (0.27 kg) |
| Weight (Transmitter) | Approx. 1.25 lb (0.57 kg) |
| Weight (CT-400) | Approx. 0.25 lb (0.114 kg) |
Datasheet
Download datasheet (PDF)Description
Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the Transmitter is connected to the circuit (Energized or De-energized, up to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors. Work safely on energized circuits without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage. The AT-6010 can be combined with the CT-400 Signal Clamp (optional accessory) for applications where access to circuit contacts is limited or where users are not able to connect the Transmitter to the circuit through test leads.
Need this instrument calibrated?
Unitest Instruments operates Singapore's SAC-SINGLAS accredited calibration laboratory (ISO/IEC 17025, Lab No. LA-2023-0845-C). We provide traceable calibration with full documentation for most test & measurement instruments.
Get a price for the Amprobe AT-6010 Advanced Wire Tracer Kit
Send your enquiry — we reply with pricing, availability & lead time within 1 business day.
